11lb 20310 Hyundai Diesel Filter Element 225 9 For Oil Water Separation

Product Description

11LB-20310 Oil-Water Separation Filter Element Hyundai R215/225-7/225-9 Excavator Diesel Coarse Filter

Diesel 11LB-20310 Hyundai R215/225-7/225-9 Excavator Coarse Fiter

Filtering technology:

1. Filter element

The requirements for oil filter elements are more stringent than air filters because the oil temperature is between 0 and 300 degrees Celsius. Under severe temperature changes, the oil concentration will also change, which will affect the filter flow rate. We provide high-quality oil filter elements that can filter impurities under severe temperature changes to ensure sufficient flow.

2. Rubber seal

We provide high-quality rubber seals made of special rubber to ensure good oil tightness.

3. Safety valve

When the engine is stopped, the oil filter is prevented from drying out; when the engine is started again, it will immediately enter pressure.

4. Pressure relief valve

Only high quality filters are provided. Only under certain conditions can unfiltered oil flow directly into the engine. For example, the outside temperature of a certain vehicle drops or the oil filter exceeds the working period. Although some impurities will be brought into the engine, the loss of empty oil is small. The safety valve is the key to prevent an emergency situation in the engine.

product description:

The paper filter element of the diesel filter should be cleaned in clean diesel oil every 250 hours. The service life of the filter element is about 500 hours. The service life of the filter element is closely related to the degree of fuel cleanliness. When it is found that the surface of the filter element is too dirty or the filter paper is deformed, it should be replaced in advance. Clean the filter, use a soft brush to gently brush off the dirt on the clean diesel oil; in order to prevent dirt from entering the cavity, it should be made of rubber or cork, and the holes at both ends should be blocked. When installing the filter element, pay special attention to the reliability of the end seal and the inlet and outlet of the oil pipe on the filter seat, otherwise the filtering effect will be lost.

Product parameter:

Product Quality Commitment :

1. The manufacturing and testing of products have records and testing data.

2. For product performance testing, the entire process and performance must be inspected, and the product will be packaged and shipped after it is confirmed to be qualified.

Product Price Commitment :

1. In order to ensure the high reliability and advancement of the product, the selection of the system is made of domestic or high-quality raw materials.
2. Under the same competitive conditions, our company will sincerely provide customers with prices on the basis of not reducing product technical performance and changing components.

After-sales service commitment:
1. Service tenet: fast, decisive, accurate, thoughtful and thorough.
2. Service goal: service quality wins customer satisfaction.
3. When necessary, the company sends technical personnel to the site to guide installation and commissioning, so that customers can use products with confidence. ...
4. If the product has quality problems under normal use environmental conditions, we promise to replace the new product or return the product for you free of charge. ...
5. Long-term ordering service can be provided! ...
6. The delivery cycle is fast, the product quality is tested, and strictly tested before leaving the factory to ensure that the high-quality products are delivered to customers. In the market, we first compare quality. Only with high-quality products can we survive And the basis of development, and secondly, we compare prices and hope to deliver high-quality and low-cost products to customers. Only in this way can it be sustainable! ...
7. Online transactions, honesty is king. we have extremely strict product requirements and control. All products will undergo three quality inspections by procurement, QC, and warehouse management personnel before shipment to ensure that they are shipped to you. The product is a qualified product.

Company Profile:
Our company has passed ISO9001: 2000 international quality management system certification enterprise. It is located in Gu'an Filter Industrial Park, 70 kilometers away from Beijing, Tianjin and Helan, and is an important production area. This is a factory specializing in the production of internal combustion engines and industrial filter components. Our company relies on the strength of the team, with strict standards and a working attitude of pursuing excellence and self-transcendence, to unswervingly realize our ideals and goals. Respect the sincere wishes of each customer and advocate the establishment of a long-term win-win partnership.